How to fix lag in online games
If the test says your ping is too high for competitive games (over 50 ms), first make sure the lag is the network and not your device's frame rate. Then pick the nearest server region in the game's settings, play on a cable, fix bufferbloat if your grade is C or worse, and pause big uploads and downloads while you play. NAT type mainly affects whether you can join, host and chat.
Lag or low frame rate?
They feel similar but have different fixes.
- Network lag: other players jump or teleport, your shots land late, you snap back to where you were a moment ago. Nintendo's support page on latency describes it as characters jumping around and slow response. Menus and the camera still move smoothly.
- Low frame rate: the whole picture stutters, including menus, the camera and single-player or offline modes. That's the device struggling, not the connection. Lower the game's graphics settings, close other programs and check the game's own performance overlay if it has one.
If the stutter happens offline too, the fixes below won't help. If it only happens online, they will.
What the numbers should be
Our verdict's limits for competitive games: ping 50 ms or less, jitter 10 ms or less, packet loss 1% or less, bufferbloat grade B or better. Run the lag test to see all four with a verdict per game type. Ping here is an HTTP round trip to the nearest Cloudflare location; your ping to a game server will differ, often by a lot, depending on where that server is.
Fix in this order, because each one can cause the next:
- Packet loss above 1%: fix packet loss first.
- Bufferbloat grade C or worse: fix bufferbloat.
- Jitter above 10 ms: high ping and jitter on Wi-Fi.
- Steady ping above 50 ms with everything else fine: read on.
Step 1: Pick the nearest server region
Ping to a game server is mostly distance. A player in Chicago on a West Coast server has a higher ping than on a Central or East Coast one, whatever their connection. If your game offers a region or server setting in its own menus, check that it's set to the region nearest you, not to "auto" picking a distant one. Some games show your ping to each region in that menu; pick the lowest. Any region figures you see elsewhere, including ours, are approximate.
Step 2: Play on a cable
Wi-Fi adds delay and jitter that a cable doesn't. Nintendo's latency troubleshooting starts with using a wired connection if possible, and suggests keeping a console within 10 to 15 feet of the router if it has to stay on Wi-Fi.
Setting up a wired connection, from each maker's page:
- PS5: plug in the cable, then go to Settings > Network > Settings > Set Up Internet Connection and select Set Up Wired LAN > Connect (Sony).
- PC: plug in the cable and turn Wi-Fi off while you test, so you know which one you're using.
Step 3: Fix bufferbloat
If someone in the house starts a download, a stream or a video call while you play and your ping jumps, that's bufferbloat. The bufferbloat test grades it; the bufferbloat guide shows how to turn on smart queue management on OpenWrt, eero, UniFi and ASUS routers. With it on, a download elsewhere in the house shouldn't move your ping much.
Step 4: Pause background uploads and downloads
Big transfers on your own device or network fill the line and raise ping, even with nobody else home:
- Game updates and downloads on the console or PC you're playing on, or on another one in the house.
- Cloud backups of photos and files, which upload in the background.
- Video uploads and file syncing.
Nintendo's advice is to turn off other devices or programs that use bandwidth, then test again. Schedule updates and backups for when you're not playing, or pause them before a match. If you fix bufferbloat, these matter much less.
Step 5: NAT type: what it does and doesn't do
NAT type decides whether your console can reach other players directly. Xbox's support page ties it to joining and hosting games and hearing friends in party chat; Nintendo's latency page includes checking it as one troubleshooting step.
- Xbox: press the Xbox button, then Profile & system > Settings > General > Network settings; the NAT type is under Current Network Status. Microsoft says you need it to be Open to fix party and multiplayer problems, and its steps start with turning on UPnP in your router, then checking the router's firmware, before port forwarding.
- Nintendo Switch and Switch 2: System Settings > Internet > Test Connection. The NAT type runs from A to F: A is best for peer-to-peer play, and F means it couldn't connect peer to peer. Nintendo's NAT troubleshooting suggests turning off IPv6 Connection in the console's internet settings and restarting the modem and router.
- PS5: Sony's connection pages we checked don't explain NAT types, so we don't either. If you can't join or chat, use Sony's support for your console.
If you can join, host and chat without errors, NAT isn't what's slowing your game; go back to the steps above.
Test again
Run the lag test on the device you play on, over the same connection, with the background downloads paused. Then play a match in the region you picked. If the test looks good but one game still lags, the problem is likely that game's servers or its route, which no home setting fixes.
Sources
Checked November 2026.